2 results for 2 part epoxy paint primer by 3m found in 0.000 seconds

3M Automotive Windshield Replacement ... instructions describe the proper use of 3M Auto Glass urethanes and related 3M ... manuals and instruc- tions provided by automotive manufac- turers. Automobile ... . However, for detailed instructions by car model, you should refer to ... Cutout Method With Dam Materials Using 3M Auto Glass Urethane-Medium Viscosity ... Part Numbers 08693, 08695, or 08564 The ... expose the entire perimeter of glass. 2. Clean dirt and debris from around the ... . Remove the glass and repeat Step 2. 5. Dry set the glass. Align for uniform ... to the space that will be taken up by any dam material, around the entire ... perime- ter of the glass. Mark location by apply- ing masking tape to windshield ... or utility knife to prevent scraping paint off the pinchweld and exposing bare ...

or utility knife to prevent scraping paint off the pinchweld and exposing bare ... 7. Prime any bare metal scratches with 3M Black Primer (Step 2) (P/N 08684 or ... required, prime pinchweld metal with a 2 part epoxy automotive paint primer and ... allow to cure properly. Apply 3M Black Primer (Step 2) to repaired area and allow to ... . 8. Clean inside surface of glass with 3M Glass Cleaner, P/N 08888 taking care to ... will be made. 9. Apply a thin film of 3M Clear Primer (Step 1) (P/N 08683, 08685 ... with a clean wipe. Wipe off excess primer with a clean lint free cloth while ... still wet. Allow primer to dry for at least 5 minutes. (Repeat ... , Step 9) 10. Apply 3M Black Primer (Step 2) (P/N 08684, 08686, or 08692) ... the primed 3/4 inch of glass. Allow primer to dry for for at least 5 minutes. 11. ...