Catalog: 3M Automotive Glass Products Catalog
Company/Brand: 3M Automotive
3m automotive butyl tape in 3M Automotive Glass Products Catalog by 3M Automotive
3M Windo-Weld Ribbon Sealer Unique ... Neat-no cleanup necessary No odor ( Tape-type sealer for use only in vehicles that ... were OEM butyl installations. Requires 3M Butyl Tape Primer PN 08643 on both ... be used on urethane bonded auto glass.) 3M Damming Products PART NO. CONTAINER ... No. 08993) used with Part No. 08634. 3M Windo-Weld Resealant (Flow Grade) Flow ...
3M Automotive Windshield Replacement Procedures These ... instructions describe the proper use of 3M Auto Glass urethanes and related 3M ... manuals and instruc- tions provided by automotive manufac- turers. Automobile ... should be followed when removing automotive trim and moldings as well as other ... Cutout Method With Dam Materials Using 3M Auto Glass Urethane-Medium Viscosity ... procedure for urethane bonded automotive windshields using the full cut out ... . Mark location by apply- ing masking tape to windshield and car body. Slit tape ... bonded to remaining film. When removing butyl tape or unknown material, remove all ... 7. Prime any bare metal scratches with 3M Black Primer, (Step 2) (P/N 08684, ... pinchweld metal with a 2 part epoxy automotive paint primer and allow to cure properly ...
bonded to remaining film. When removing butyl tape or unknown materi- al, remove all ... 7. Prime any bare metal scratches with 3M Black Primer (Step 2) (P/N 08684 or ... pinchweld metal with a 2 part epoxy automotive paint primer and allow to cure properly ... . Apply 3M Black Primer (Step 2) to repaired area ... . 8. Clean inside surface of glass with 3M Glass Cleaner, P/N 08888 taking care to ... will be made. 9. Apply a thin film of 3M Clear Primer (Step 1) (P/N 08683, 08685 ... 5 minutes. (Repeat, Step 9) 10. Apply 3M Black Primer (Step 2) (P/N 08684, 08686 ... setting will not be possible. 13. Apply 3M Auto Glass Urethane Windshield Adhesive ... High Viscosity, or 3M Fast Cure Auto Glass Urethane, directly ... the glass by aligning the masking tape on glass and car body. Press glass in ... body to fill voids. 16. Remove masking tape alignment strips. 17. Replace moldings ...
