Catalog: 3M Automotive Glass Products Catalog
Company/Brand: 3M Automotive
auto glass adhesives urethane in 3M Automotive Glass Products Catalog by 3M Automotive
1 Contents 3M Auto Glass Urethane Adhesives 3M Primers 3M Damming Products 3M ... Aerosol Adhesives, Cleaners Lubricants 3M Automotive ... 3M Abrasive Products 3M Aerosol Adhesives, Cleaners Lubricants continued... 19-20 ... Replacement Instructions 7 Automotive Bedding Glazing Compound 9 Anti-Seize ... Trim Adhesive 10 Spray Trim Adhesive 10 Glass Cleaner 10 General Purpose Adhesive ... Tri-M-Ite Resin Bond Cloth Discs 16 Duo-Glass Belts 3 Fast Cure Auto Glass Windshield ... Adhesive 3 Auto Glass Urethane Windshield Adhesive-(HV) 3 Auto Glass ... Urethane Windshield Adhesive-(MV) 3 Windo-Weld ... Super Fast Urethane 4 Rapid Two-Part Auto Glass Urethane Windshield Adhesive (RTP ... Tape -No. 2090 8 Structural Adhesive 8 Automix Channel Bonding Sidelite Adhesive 3M ...
...A Structural Member of Todays Automobile In the early 1980s auto makers ... vehicle aerodynamics. Flush-mounted glass and the windshield becoming a ... windshield a designed safety feature, glass shops had to consider specific ... Safety Act (see bottom of page). Glass shops were now responsible for ... replacing glass to meet OEM specifications. 3M is an ... . 3M has provided products to the automotive industry for glass installation the ... 40 years: In 1972, 3M reacted to new auto glass technology by pioneering the use ... -mounted windshields. 3M is the only urethane manufacturer to have two windshield ... urethane adhesives that are both Carlite by Visteon ... licensed by NASCAR : 3M Rapid Two Part Auto Glass Urethane passed the rigorous ... temperature procedure. 3M Fast Cure Auto Glass Urethane (one-part, high ...
3M Windo-Weld Super Fast Urethane Moisture curing adhesive/sealant ... Officially Licensed by NASCAR 3M Auto Glass Urethane Adhesives 3M Auto Glass ... Urethane Windshield Adhesive-(High Viscosity) ... High viscosity-glass supporting Meets FMVSS 212 216 Meets ... 08565 600 ml/ Flex Pack 12 3M Fast Cure Auto Glass Urethane Fast cure High ... viscosity-glass supporting Meets FMVSS 212 216 Meets ... 12 *08566 600 ml/ Flex Pack 12 3M Auto Glass Urethane Windshield Adhesive-(Medium ...
3M Rapid Two-Part Urethane Windshield Adhesive (RTP) Fast cure ... *Can be accelerated by heat assist 3M Auto Glass Urethane Adhesives PART NO. NET ... Primer (Step 2) Prior to using, clean glass with 3M Glass Cleaner (08888) PART NO. ... or 08685) prior to bonding with 3Ms auto glass urethane windshield adhesives. ...
yet will not squeeze out or allow glass to contact pinchweld Excellent glass ... and pinchweld. Not to be used on urethane bonded auto glass.) 3M Damming Products ... and backlite car models Do not use on urethane set stationary glass Flows easily into ... into flexible, rubbery seal Adheres to glass, painted metal Excellent resistance to ...
3M Automotive Windshield Replacement Procedures These ... describe the proper use of 3M Auto Glass urethanes and related 3M glass shop ... manuals and instruc- tions provided by automotive manufac- turers. Automobile ... should be followed when removing automotive trim and moldings as well as other ... refer to information available from the automobile manufac- turer. Full Cutout Method With ... Dam Materials Using 3M Auto Glass Urethane-Medium Viscosity Part Numbers 08693, 08695, or ... cover replacement procedure for urethane bonded automotive windshields using the ... to expose the entire perimeter of glass. 2. Clean dirt and debris from around ... pinchweld area before cutting out the glass and again after the glass is cut out to ... contamination. 3. Cut into existing urethane around entire perimeter of glass with a ...
and exposing bare metal. NOTE: On urethane installations, it is recommend- ed that ... a thin film of the old urethane be left on the pinchweld and fresh ... urethane is bonded to remaining film. When ... pinchweld metal with a 2 part epoxy automotive paint primer and allow to cure properly ... 5 minutes. 8. Clean inside surface of glass with 3M Glass Cleaner, P/N 08888 taking ... or 08691) to the outer 3/4 inch of the glass with a clean wipe. Wipe off excess ... , or 08692) over the primed 3/4 inch of glass. Allow primer to dry for for at least 5 ... . NOTE: Where installing encapsulated glass, apply a bead high enough to assure ... glass con- tact before encapsulation contacts ... will not be possible. 13. Apply 3M Auto Glass Urethane Windshield Adhesive High ... Viscosity, or 3M Fast Cure Auto Glass Urethane, directly onto the OEM urethane film on ...
