Catalog: 3M Automotive Glass Products Catalog
Company/Brand: 3M Automotive
auto glass catalogs in 3M Automotive Glass Products Catalog by 3M Automotive
1 Contents 3M Auto Glass Urethane Adhesives 3M Primers 3M ... Adhesives, Cleaners Lubricants 3M Automotive Windshield Replacement Procedures 3M ... ... 19-20 Replacement Instructions 7 Automotive Bedding Glazing Compound 9 Anti-Seize ... Trim Adhesive 10 Spray Trim Adhesive 10 Glass Cleaner 10 General Purpose Adhesive ... Tri-M-Ite Resin Bond Cloth Discs 16 Duo-Glass Belts 3 Fast Cure Auto Glass Windshield ... Adhesive 3 Auto Glass Urethane Windshield Adhesive-(HV) 3 ... Auto Glass Urethane Windshield Adhesive-(MV) 3 ... Super Fast Urethane 4 Rapid Two-Part Auto Glass Urethane Windshield Adhesive (RTP ... Tape -No. 2090 8 Structural Adhesive 8 Automix Channel Bonding Sidelite Adhesive 3M ... -Clear 13 Applicator Guns 13 Shop/Glass Stand 8 Rear View Mirror Adhesive 8 ...
...A Structural Member of Todays Automobile In the early 1980s auto makers ... vehicle aerodynamics. Flush-mounted glass and the windshield becoming a ... windshield a designed safety feature, glass shops had to consider specific ... Safety Act (see bottom of page). Glass shops were now responsible for ... replacing glass to meet OEM specifications. 3M is an ... . 3M has provided products to the automotive industry for glass installation the ... 40 years: In 1972, 3M reacted to new auto glass technology by pioneering the use ... licensed by NASCAR : 3M Rapid Two Part Auto Glass Urethane passed the rigorous ... temperature procedure. 3M Fast Cure Auto Glass Urethane (one-part, high ... and 80% relative humidity, 3M Fast Cure Auto Glass Urethane reaches an Overlap Shear ...
Officially Licensed by NASCAR 3M Auto Glass Urethane Adhesives 3M Auto Glass ... -(High Viscosity) High viscosity-glass supporting Meets FMVSS 212 216 Meets ... 08565 600 ml/ Flex Pack 12 3M Fast Cure Auto Glass Urethane Fast cure High ... viscosity-glass supporting Meets FMVSS 212 216 Meets ... 12 *08566 600 ml/ Flex Pack 12 3M Auto Glass Urethane Windshield Adhesive-(Medium ...
*Can be accelerated by heat assist 3M Auto Glass Urethane Adhesives PART NO. NET ... Primer (Step 2) Prior to using, clean glass with 3M Glass Cleaner (08888) PART NO. ... or 08685) prior to bonding with 3Ms auto glass urethane windshield adhesives. ...
yet will not squeeze out or allow glass to contact pinchweld Excellent glass ... . Not to be used on urethane bonded auto glass.) 3M Damming Products PART NO. ... Do not use on urethane set stationary glass Flows easily into pinholes and ... into flexible, rubbery seal Adheres to glass, painted metal Excellent resistance to ...
Will not harm most thoroughly cured automotive paint, vinyl or fabrics when properly ... bond between weatherstrip and metal, auto glass and rubber grommets Works on all ... Adhesives, Cleaners and Lubricants 3M Glass Cleaner Excellent all-around cleaner ...
Your 3M Auto Glass Certification Kit Materials Include: ...
3M Automotive Windshield Replacement Procedures These ... describe the proper use of 3M Auto Glass urethanes and related 3M glass shop ... manuals and instruc- tions provided by automotive manufac- turers. Automobile ... should be followed when removing automotive trim and moldings as well as other ... refer to information available from the automobile manufac- turer. Full Cutout Method With ... Dam Materials Using 3M Auto Glass Urethane-Medium Viscosity Part Numbers ... procedure for urethane bonded automotive windshields using the full cut out ... to expose the entire perimeter of glass. 2. Clean dirt and debris from around ... pinchweld area before cutting out the glass and again after the glass is cut out to ... urethane around entire perimeter of glass with a utility knife. Cut as close to ...
pinchweld metal with a 2 part epoxy automotive paint primer and allow to cure properly ... 5 minutes. 8. Clean inside surface of glass with 3M Glass Cleaner, P/N 08888 taking ... or 08691) to the outer 3/4 inch of the glass with a clean wipe. Wipe off excess ... , or 08692) over the primed 3/4 inch of glass. Allow primer to dry for for at least 5 ... . NOTE: Where installing encapsulated glass, apply a bead high enough to assure ... glass con- tact before encapsulation contacts ... will not be possible. 13. Apply 3M Auto Glass Urethane Windshield Adhesive High ... Viscosity, or 3M Fast Cure Auto Glass Urethane, directly onto the OEM ... on the pinchweld or directly to the glass. 14. Position the glass by aligning the ... masking tape on glass and car body. Press glass in place to ...
