4 results for auto glass material found in 0.000 seconds

, road tars, grease, oil and similar materials Will not harm most thoroughly cured ... automotive paint, vinyl or fabrics when properly ... bond between weatherstrip and metal, auto glass and rubber grommets Works on all ... Adhesives, Cleaners and Lubricants 3M Glass Cleaner Excellent all-around cleaner ...

Your 3M Auto Glass Certification Kit Materials Include: The 3M Certification Program ... your commitment to quality. Use these materials to show your customers you took the ... to order more certification program materials. 7. Patch Have each certified employee ...

3M Automotive Windshield Replacement Procedures These ... describe the proper use of 3M Auto Glass urethanes and related 3M glass shop ... manuals and instruc- tions provided by automotive manufac- turers. Automobile ... should be followed when removing automotive trim and moldings as well as other ... refer to information available from the automobile manufac- turer. Full Cutout Method With ... Dam Materials Using 3M Auto Glass Urethane-Medium Viscosity Part Numbers ... procedure for urethane bonded automotive windshields using the full cut out ... procedure with dam material. The dam material provides the proper setting height. 1. ... to expose the entire perimeter of glass. 2. Clean dirt and debris from around ... pinchweld area before cutting out the glass and again after the glass is cut out to ...

or unknown materi- al, remove all old material from pinch- weld. 7. Prime any bare ... pinchweld metal with a 2 part epoxy automotive paint primer and allow to cure properly ... 5 minutes. 8. Clean inside surface of glass with 3M Glass Cleaner, P/N 08888 taking ... or 08691) to the outer 3/4 inch of the glass with a clean wipe. Wipe off excess ... , or 08692) over the primed 3/4 inch of glass. Allow primer to dry for for at least 5 ... it is suggested that foam dam material be replaced. 12. Cut tip to desired ... . NOTE: Where installing encapsulated glass, apply a bead high enough to assure ... glass con- tact before encapsulation contacts ... prevents further setting. Back paddling material after setting will not be possible. 13 ... . Apply 3M Auto Glass Urethane Windshield Adhesive High ...