Catalog: Classic Pontiac GTO Catalog | |
| (RP) ................ 30.00/ea. Note: These belts are offered as an ... available in black only. Bucket seat applications only. At this time the rear belts are ... . A138GA and A138GC are for bucket seat applications only. Comments: Quality is very good. ... is used for front seat belts except for applications with retractors. A139PK 1964-66 Cad ... | |
| to seat upholstery colors on page 6. Note: See page 16 for door panel, emblem, and ... as well as unmatched delivery times. Note 4: PUI and Legendary interior colors ... | |
| 2.00/ea. Note: These clips are used on all 71-77 power ... 105.00/set Note: Please include $8.50 shipping for A171 ... A-Body) (APE)............... 105.00/set Note: Please include $8.50 shipping for A181 ... available in full sets only. Important Note: Our mats are manufactured using an ... is a practically indestructible crest. Note: As with any large rubber product, small ... , they must be cut for bucket seat applications. This procedure was used by GM from 1964 ... | |
| 80/20 loop or cut pile and color. Note: For colors other than black, please ... heel pad (RE) ....... $109.00/set Note: A198 uses the correct heel pad ... grommet is included where applicable. NOTE: As lower-priced products enter the ... | |
| and are ready to be welded in place. Note: Seat belts attach to the center floor ... floor excluding under the rear seat. Note: A215YG and A215YH must be prepaid and ... (RE) ....................... 59.00/ea. Note: We can supply our very successful 19- ... halves or quarters, depending on your application. These floor pans are the finest ... center of the floor. Recommended for applications where the entire brace is not needed. ... | |
| Horn Switch (RE)............ 39.00/ea. Applications are as Follows: 1965-66 Standard Deluxe ... (grip) circumference of about 3 1/4 . Note: The manufacturing process for this ... (RE)..................... . 249.00/ea. Note: This is the thicker reproduction wheel ... dimensions are the same as original GM. Note: Various leather and spoke colors are ... please check with us for availability. Note: A249 through A249DC are the wheels only ... | |
| , these can add a custom look in these applications as well. Quality: Excellent. A259VK ... ) (RE)..................... .. Inquire Note 1: A259VA A259VT are made using a ... of hard urethane lower quality pads. Note 2: You will need to reuse your original ... in black only. Paint to match. Note 3: On 1964-66 cars a hole will need to ... | |
| (RP) .................... 69.00/ea. Note: The bezel on A273PJ is made from ... length may differ from your original application. Comments: These switches have proven to ... R and F. You must check your particular application since many stereo radios used Balance ... Dash Knob Set (RE)........ 13.00/set Note: A274LG contains 2 radio knobs and the ... and select controls on your radio. Note: This knob can also be used for the 1967 ... 15.00/ea. Note: Some cars (usually 1969 models) used a ... | |
| stippled cardboard tray was used in all applications except cars factory-equipped with rear ... causing unnecessary noise and chatter. Note: For prompt service we always stock in ... of 200 package trays. Installation note: Some trimming may be necessary for ... installation. Certain applications may require folding the ends to tuck ... behind the headliner sail panels. Note: Please add $12.00 shipping for ... package trays are of excellent quality. Note 1: For prompt service we always stock ... in excess of 200 package trays Note 2: 1964-1967 have one speaker location ... have two speaker locations Installation note: Some trimming may be necessary for ... installation. Certain applications may require folding the ends to tuck ... behind the headliner sail panels. Note: Please add $12.00 shipping for mesh ... | |
| correctly contoured bows for your application. PERFORATED STAR PATTERN A328H A328K ... on these headliners excellent value. Note: For prompt service we have 75-80 ... 59.00/ea. Note: Two types of 5-bow headliners were used ... | |
| 26.00/ea. Note: B101AA is a low-pressure casting. B102 ... 26.00/ea. Note: B102B is a low-pressure casting. B103 ... may be used for custom engine upgrade applications. F R O N T E N D T R I M B110 1966 GTO ... due to its complexity and size. Note: Grille moldings, parking lamp ... Surrounds GTO (GM-APE) 229.00/pr. Note: Sold in pairs only. These surrounds are ... GM tooling. Quality: Excellent. Note: Please add $12.00 shipping for B109 ... | |
| Mounting Grommets 4pc. (RE) 8.50/set Note: 1965 did not use these grommets. 1964 ... . Will need to be painted for Judge applications. Quality:Very good. B138 1965 Tempest ... (L or R) (RE) ......... $159.00/ea Note: original GM part no. 5956794 B139 1965 ... (L or R) (RE).......... 162.00/ea Note: original GM part no. 5957313 The ... are selling the Tempest doors for all applications. Screws and B140 gasket included. ... | |
| available. Quality: Excellent. Note: Please include $8.50 shipping for ... Kit, 5 pc (RP)............. 3.00/kit Note: Bolts have 10mm Hex head. Black ... with endura bumper and 1970 Tempest. Note: 8 required per car. B185D 1969-75 ... bumper. This has the push-in style nut. Note: 8 required per car. B185J 1965-67 ... .00/ea. B185T is used for chrome bumper applications. Note: for B185J B185T, 4 required per ... , A-Body (AP)............... 35.00/kit Note 1: These kits contain enough pieces to ... assembly of the front end sheet metal. Note 2:These kits contain bolts and shims ... | |
| , Steel (RE)....... 159.00/ea. Quality Note: Both ends of B201A exhibit wrinkles ... to fit tightly. Quality: Fair to good. Note: Please include $15.00 shipping for ... 2.00/ea. Quantities vary by application. B199YF 1964-67 Bumper Bracket to Frame ... 46.00/set Note: Letters are low-pressure castings. ... . Quality: Both header panels are good. Note: Please add $12.00 shipping for header ... | |
| Louver (RE) ........... 14.00/ea. Note: 9 required per fender. C101FG C101H ... Fender Louver (RE) ........... 9.00/ea. Note: 9 required per fender. F R O N T F E N ... within the letters. Die-cast piece. Note: The bottom bar must be painted body ... 51.00/pr. Note: C101E through C101S are low-pressure ... emblems are not available for these applications. C103CR C103CR 1970 LeMans Sport Front ... Fender Bar (RE)........ 17.00/ea. Note: 4 required per fender. C103CW 1971 ... , LH (RE) .............. 17.00/ea. Note: 7 required per fender. C103CY 1971 ... Louver, RH (RE).............. 17.00/ea. Note: 7 required per fender. C103D C103E ... | |
| Emblems, Pair (RE) .......... 51.00/pr. Note: 455 emblems were not originally used by ... Pontiac in this application. This emblem is intended as an after- ... emblems are not available for these applications. ROCKER MOLDING EXTENSIONS C104 C104A ... moldings will need to be drilled. Note: Fenders must be prepaid and will be ... 25.00/ea. Note 1: Fender extension moldings do not ... include hardware. Note 2: Fender entension moldings are ... | |
| w/stud (A-body) (RE)......... 4.50/ea. Note: If your cars original studs and nuts ... tall. It must be cut for your specific application (actual height is 1 3/16 ). D115C 1968- ... also fit 1968-70 Lemans and Tempest. Note 1: For Ram Air applications the ... to be cut to accept Ram Air components. Note 2: The center contour line slightly ... is easily corrected with minimal work. Note 3: The lip inside the scoop cavity has ... gaps are wider on D105 than originals. Note 1: This hood uses the 1967 cage nut ... studs. For hinge bolt kit use D134C. Note 2: For Ram Air applications the ... including satin-brushed surfaces. Note: Beware of inexpensive low-pressure ... directly from the manufacturer. Freight Note: Please inquire for truck freight ... | |
| the closed scoops used in non ram air applications. Quality: Good to excellent. RAM AIR ... SCOOPS Note: For 1965-67 and 1968-70 Ram Air hood ... touch for your restoration project. Note 1: Due to the size and nature of this ... , $35.00 extra shipping is required. Note 2: Cars equipped with ram air did not ... the 1968 Ram Air II was the only application that Pontiac had intended using a 5500 ... and functionality is very good. Note 1: Please test your new tach before ... painting it. Note 2: Before painting, lightly scuff the ... | |
| . Button shafts must be cut to fit your application. DOOR HANDLES F103 D O O R C O M P O N E ... 18.00/pr. Note: For lock sets see the Miscellaneous ... RE)..................... .... 4.50/ea. Note: For door keys, see the Electrical ... | |
| 15.00/pr. Note: One kit per car. F130A 1964-67 Door ... and bushings for all four door hinges. Note: One kit per car. F121L F122 F111 F111 ... the hinge to the door and/or pillar. Note: Please check your hinges for correct ... application. F121L 1964-65 Lower Door Hinge, LH (RE ... | |
| View Mirror Pad (APE) ..... 3.50/ea. Note: This is the pad that comes with F160. ... numbers of 15-1548 or 61076 (for these applications use F161A). F160T 1967-68 Outside Rear ... the 67-68 mirror part number 9787901. Note: These mirrors do not have the same ... )..................... ....... 4.00/ea. Note: All applications require 2 door bumpers ... Door Alignment Wedges (RE) 75.00/set Note: F140 includes screws, F142 does not ... | |
| 49.00/set Note: Please include $12.00 shipping for ... F216F. Note: For vinyl top applications, please inquire.. F216K 1968-72 Drip ... minor imperfections in material. Note: For vinyl top applications, please ... | |
| your installation. See installation note under H137. H138D H138DB H138D 1964-66 ... 6.50/ea. Note: These clips hold the hose in place for ... Bleeder System.............. 18.00/ea. Note: This kit comes complete with filler ... 255.00/ea. Note 1: As with any top hydraulic system, do ... reservoir more than 75% of capacity. Note 2: This pump and motor mounts like the ... has an original type plug. For 1964-66 applications, an extra hole is required for mounting ... H137. Installation Note: When changing components in hydraulic ... (RP) .................... 69.00/ea. Note: The bezel on H139F is made from ... | |
| some waves and require some work. Note 1: These patch panels are duplicates of ... , these panels can be contoured to fit. Note 2: For 69 LeMans or Tempest use J185L R ... are manufactured using 20 ga. steel. Note: Please add $12.00 shipping for patch ... , All 2DR (RE)............. 199.00/ea. Note 1: Actual panel is for the 1966 model. ... just in front of the bumper for 67 applications. Note 2: These 66-67 panels fit poorly ... | |
| smoother surface on the reproduction. Note: These spare tire covers are gray and ... a closer match between mat and cover. Note: K108 K108K material is somewhat ... used in the 1969-77 trunk mats. See note under K106J. K112 1964-72 Jack Pack, ... ea. We offer GM spatter paint for those applications where being GM is a must. These colors ... spatter is very fine unlike original. Notes: Occasionally customers that order K122 ... feel they have received K121. Note 1: The grey in K121 is very light, ... similar to concrete. Note 2: The black in K122 is actually a ... | |
| . Please inquire for freight charges. Note: Add $20.00 box fee. Quality Note: At ... product. Please inquire. Installation Note: Due to the size of this pan ... from the frame. For non-frame off applications we strongly suggest using K157AA-K157C ... | |
| o Stainless, RH (RE) ....... 139.00/ea. Applications: 1970-71 Tempest and base Lemans, 1972 ... GTO, 1972 Lemans and Lemans Sport. Note: These lenses leave a 3/8" vertical gap ... Stainless, RH (RE) ......... 139.00/ea. Applications: 1970 GTO, 1970 Lemans Sport, 1971 ... Lemans Sport (second design). Note: The supplier has been experiencing ... , RH (RE) ................ 139.00/ea Applications: 1971 GTO, 1971 Lemans Sport (1st Design ... ), and 1972 Luxury Lemans. Note: These Lenses leave a 3/8" vertical gap ... from ABS plastic. Very good quality. Note:Fits GTO LeMans only L162BP L162BP 1966 ... | |
| 229.00/ea. For 1970 applications with EES, Please inquire. L205W 1971-72 ... as original. Quality: Excellent.. Note 1: Fuel tank capacities are to OEM ... specifications. Note 2: There is an additional $85.00 fee ... reinforcement rib down the center. Note: L206 and L206A do not include hardware ... gas tank. L220A and L221A Installation note: Allow material to warm prior to ... | |
| 00/ea. Also fits 1967 with 2BBL. w/o AC Note: M132 has a 3/8" outlet. Originals were ... a sock filter attached and O-rong seal. Note 1: M136J will not fit (1975 400 or 455 ... ) or (76 Grand LeMans). Note 2: Due to a major AC Delco price ... complete with switch, wires and plug. Note: For years, the identification process ... shaped hole. You must know your application and type before ordering since Delco ... also advised that you count wires and note the colors of the wires in the ... connector for proper application. HAZARD FLASHER AND KNOB GAS GAUGE ... | |
| 0-60 PSI-All (RP)............ 42.00/ea. Note: M195 is a replacement sending unit ... pressure sending unit for rally gauge applications only. Addition of this commonly missing ... and grille behind the rear seat. Note: 4 required per speaker. M181C 1973-77 ... | |
| 43.00/ea. M232C 1964-77 Low Note Horn (RP ... 20.00/ea. M232E 1964-77 High Note Horn (RP ... Regulated Alternator (GM)... 48.00/ea. Note: Delco Remy is stamped straight across ... Alternators. Used from 1966-70 all applications with A/C or heavy duty charging. These ... May 12 1969). Pulley and Fan included. Note: M2496N may exhibit some shelf wear. ... | |
| CA, 700CCA) (RE)........... 289.00/ea. Note: 1966 is a transition year between M252 ... M254H has textured case. Very few 1971 applications used M253 (most cars were equipped with ... warranty from the date of purchase. Note 1: These batteries all have group 24 ... (L 10 1/2", W 6 7/8" and H 8 3/4"). Note 2: Lead-Acid batteries (M251, M252, ... acid. Acid and charging are required. Note 3: Maintenance-Free batteries are ... units inside an original-style case. Note 4: Batteries must be prepaid and will ... . Please allow 2-3 weeks for delivery Note 5: Discounts do not apply to batteries ... : convt., power seat, or power windows. Note: All negative cables for 1964-67 are the ... | |
| 55.00/pr. Note: Very few 1971 applications used M369-M371. Most were equipped with ... diameter somewhat larger than original. Note: For cars using RA/HO manifolds use ... cable listed for RA/HO application. This will give the correct positive ... stud (GM).... 5.00/ea. Installation Note: Sequence: washer, battery cable, then ... RE) ......................... 82.00/ea. Note: When ordering M441 or M443, you will ... | |
| are non-returnable; please verify your application carefully. Please refer to the ... ) P.W. POWER WINDOWS ENGINE HARNESSES Note 1: If your 67-71 car is equipped with ... the harness listed for Ram Air/HO. Note 2: New engine harnesses can be ordered ... 00 each. Please specify when ordering. Note 3: Do not order transistorized ignition ... 102.00/ea. For 1965 applications with Rally Gauges #06235 adapter ... | |
| ) ......................... $20.00/ea. Note: This special tri-power fuel inlet ... | |
| RP) ......................... 3.00/kit Note: N128RG through N128RN are replacement ... now able to offer 3/8 lines for these applications where higher volume of fuel delivery is ... | |
| Bolt Hole) (AP) ............ 2.00/ea. Note: N129SB thru N129SF are shown actual ... need a 5/8" O.D. hose clamp for this application. FUEL LINE CLIP SETS N130C 1964-65 5/16 ... 10.00/ea. Note: This replacement filter is not the same ... (GM)..................... .. $8.00/ea. Note: This replacement filter is not the same ... 10.00/ea. Note: This replacement filter is not the same ... Gasket (RP) .............. 1.50/ea. For applications with fuel filter in carburetor ... | |
| 45.00/set Note 1: Using stainless steel, we are now ... in rust-resistant divider plates. Note 2: Since these plates are used in many ... contouring may be necessary in your application. N140PF N140PA N140NV N140PT N140PT 1969 ... | |
| tubes once it is inside the manifold. Applications: 1965 all V8, 1966 2 4 BBL V8 and 1967 ... Manifold Plate w/Gasket(RE).. 32.00/ea. Note: The choke lines are inserted into this ... | |
| for 2 barrel, 4 barrel, and tri-power applications. Quality: Good. N150 1968-71 Throttle ... (RE)..................... .. 4.50/ea. Note: We have seen both the yellow and blue ... ) (RE) ................... 15.00/set Note: When changing a tri-power from vacuum ... ) N151 or N152 linkage bolts to this. Note: Gold cadmium-plated ... | |
| carb to the power brake vacuum hose. Note: This correct line and fitting is ... with N139P for all non power brake applications. This is how GM blocked off the vacuum ... | |
| 16.00/ea.. Note: This is the cold start sensor usually ... 225.00/ea. Note: This is the chrome-louvered air cleaner ... 235.00/ea. Note: This is the chrome-louvered air cleaner ... Cleaner Chrome Lid (RE)... 199.00/ea. Note: This is the chrome lid only. N176T 1967 ... Assembly (RE)................ 65.00/ea. Note:This reproduction assembly consists of ... work with nonoriginal Holley carburetor applications. N175D N175D 1971-72 GTO Ram Air Hood ... enables it to be used on non-455 HO applications. For 455 HO, the passenger side snorkel ... | |
| RE)..................... .... 2.50/ea. Note: N177AG also is used on 66 center carbs ... Cover, 14 OD (RE)...... 42.00/ea. Note: N177A consists of chromed air cleaner ... Cover-Ram Air, 13 OD (RE) 47.00/ea. Note: N177B and N177C consist of primered air ... 12.00/ea. Note: For 1964-66 tri-power paper air filters ... 7.00/ea. Certain years and applications do not require this gasket ... | |
| Winters foundry trademark snowflake. Note 1: Intake ports must be gasket-matched ... . Note 2: Manifold finish is brighter than ... N178FG will fit any 1965-71 Pontiac V8. Note1 : This is the manifold only. N177YK ... the valve cover to the Ram Air pan. Note: Use N220A valve cover grommets with ... range for N178HA is idle 5000 RPM Note: N178HA will accept OEM style Quadrajet ... range for N178HB is 1500 5000 RPM Note 1: N178HB will accept OEM style ... as well as non-spread-bore style. Note 2: N178HB will not fit 1974 GTO shaker ... scoop applications without modifications. No further ... | |
| All Pontiac V8 (RP) ......... 15.00/pr. Note 1: The exhaust crossover (center) ports ... . Recommended for high performance applications. Note 2: N178RT does not include the o- ... 19.00/set Note: N178P, N178R, N178T, and N178V include ... range for N178HC is 2500 6500 RPM Note 1: N178HC will not accept OEM style ... the use of an adapter plate see FN485N. Note 2: N178HC will not fit 1974 GTO shaker ... scoop applications without modifications. OEM type choke ... | |
| 369.00/pr. Note: N179G LH Manifold is attached to the ... originally designed for 1967 HO applications, N179G will work on any 1964-67 with ... 379.00/pr. Note 1: N179H LH manifold uses the N180A two ... and attaches to the head with 4 bolts. Note 2: Be aware that 1972 D-port heads are ... 379.00/pr. Note 1: N179HK LH Manifold uses the N180A ... Each attaches to the head with 5 bolts. Note 2: N179HK original 1968-69 manifolds ... be used for Edelbrock aluminum head applications. 2 1/2 COLLECTOR MANIFOLDS N179GC 1967 D ... 429.00/pr. Note: N179GC LH Manifold is attached to the ... originally designed for 1967 HO applications, N179GC will work on any 1964-67 with ... 429.00/pr. Note 1: N179HC LH Manifold is attached to ... RH uses the N180E three-bolt flange. Note 2: Be aware that 1972 D-port heads are ... | |
| all clamps and hangers. Important note: The following Magnaflow systems are ... ) (AP) ................... 429.00/set Note: For 17107 17119 short extension pipes ... must be used in Edelbrock aluminum head applications. N179KM Round Port Header Collectors ... 3/4 tubes, and a 3 collector for D-Port applications and 1-7/8 tubes, and a 3- 1/2 collector ... for Round-Port applications. All come with 3/8 mounting plates. ... are included with all header kits. Note: No further discounts apply to headers. ... | |
| 14.00/pr. Note: N179PM and N179PN are original-style ... sandwich gaskets with hi-tensile bolts. Note: Original style gaskets were steel and ... information concerning your particular application. Dual exhaust prices start at $325.00 ... weeks for dropshipped exhaust systems. Note 1: For exhaust hangers please refer to ... Section Ten. Note 2: 1966-69 OEM exhaust systems use a 14 ... side and a 17 case on the driver side. Note 3: When ordering please specify type of ... | |
| since most were discarded years ago. Note: Although GM used the same part number ... Header Pipes 2 1/4 (RE)..... 129.00/pr. Note 1: N179T-N179V can be used with both ... and round-port R/A exhaust manifolds. Note 2: N179T, N179U and N179V will be ... duplicate. Header pipes are aluminized. Note 3: N179T-N179V header pipes cannot be ... flange studs and exhaust manifolds. Note: N180B studs are for R/A and HO manifold ... applications only. Standard manifold studs are ... designed for the 67 HO and R/A applications, this stainless shield helps insulate ... down between #5 and 7 exhaust ports. Note: N180D and N180E cannot be used with R/A ... | |
| -HO cars use 2 N180YKs while all other applications only require 1. N180YP 1968-75 Air ... -HO cars use 2 N180YKs while all other applications only require 1. N180YA N180YA 1968-70 ... 84.00/ea. Note: This is an exact reproduction of the ... AC/Delco high torque starters for applications where originality is important. Where ... | |
| is lighter than the original blue. Note: Due to the extremely high cost of ... 8.00/kit Also fits 1964-67 single 2BBL applications. N187L does one carb only. N188G vacuum ... | |
| only for off-road use on 1975-77 cars. Note: For Ram-air applications, a 90 banjo ... | |
| ./kit 4-Barrel-Q Jet 50./kit 76./kit Application, type of carburetor and carb must be ... kits are available for 64-75 cars only. Note: For Tri-power throttle plate shafts see ... 350, 400 or 455) (AP) 22.00/kit Note 1: 1971-74 X-body and 75-77 A-body carb ... a carburetor number. Please Inquire. Note 2: Of the many standard carburetor kits ... (RP) ...................... 6.50/ea. Note: Requires 2 per carb. N206 1967-68 ... | |
| 34.00/set Note: Consists of two brackets and two ... 30.00/set Note: Consists of two brackets and two ... 30.00/set Note: Consists of two brackets and three ... 45.00/set Note: Consists of three brackets and two ... Design (RE)............... 41.00/kit Application: 1969 all AT and 1971 455HO. These kits ... control devices, these kits are a must. Note: N213D and N213G do not include the ... was used by GM for various years and applications. N213J N213J Vacuum Port Plug Kit (AP ... ported vacuum to the distributor. Applications are as follows: Std. horsepower 400 MT ... car that this unit function properly. Note 1: Applications for this part are as ... All, 1969 All AT, and 1971 All 455HO. Note 2: 1970 used a three prong electronic T ... | |
| Loom Brackets (RE) ...... $64.00/set Note: Consists of six neoprene-coated ... )..................... ..... 10.00/set Note: Consists of four plastic retainers. ... 61.00/set Note: Consists of six neoprene-coated ... Plug Wire Loom Brackets (RE) 64.00/set Note: Consists of six neoprene-coated ... 3.50/ea. SPARK PLUGS AND WIRES Note 1: In 2002 we contracted with a major ... , these wires are now state of the art. Note 2: These original-style plug wires are ... Set 2-Q-67 (RE)............. 61.00/set Note: 2Q66 or 4Q66 wires should be used on ... Set 2-Q-69 (RE)............ 61.00/set Note: 1969 model year applications with air ... Set 1-Q-74 (RE) ........... 69.00/set Note: These plug wire sets are custom cut to ... | |
| used on most factory high-performance applications. A great addition for that concours ... restoration. Note: Limited quantity available. N219HDD ... fine tuning of the advance to specific applications. Instructions are included. N219HM 1974- ... Cap, rotor, and coil are not included. Note: N219HJ and N219HM are replacement ... | |
| .140" thick neoprene. Use for all applications except RA IV and modified valve trains ... cork gaskets used originally on 1964-69 applications; however, for longevity, we recommend ... .00/pr. N222Y is used in roller-rocker applications or when early style OEM-style valve ... is commonly used in roller-rocker applications. Studs and nuts are included. VALVE ... Retainer (RE)............... 13.00/ea. Note: This original-style retainer, which is ... that run along the intake. Some 1964 applications require 2 of N223H, one on each side of ... manifold bolts on the passenger side. Note: Applications for this part are as ... to offer optimum strength in hightorque applications. Engine mount components continue on ... | |
| rails for optimal sealing. See gasket notes above. N323 1964-77 Oil Pan, All w/ ... were used on later years. See gasket notes above. Quality: Good to very good. ... plating is fair to good. See gasket notes above. N280 1966-68 Upper Dipstick Tube ... Plug, All Pontiac V-8(GM) 4.00/ea. Note: This has a 9/16 Hex head unlike the ... 1.50/ea. Note 1: Use N326A gasket set for 1964-71, ... use N326D for 1972-77. Note 2: For 1972-77 applications, the rear ... out causing a severe leak. For this application use N326D for a gasket set. N326A 1964- ... | |
| Steering Belt (RE) ......... 34.00/ea. Note: First design uses a two groove pulley ... )..................... ...... 32.00/ea. Note: Second design uses separate drive belts ... Steering Belt (RE) ......... 33.00/ea. Note:This pulley arrangement requires only one ... Steering Belt (RE) ......... 35.00/ea. Note: This pulley arrangement requires only ... RE)..................... ... 35.00/ea. Note: For 1966-67 A.I.R. (Air Injection) ... applications, please inquire. 1968 All V8 Without ... to ensure the proper date-code for your application. We offer two date-code options for each ... to the correct part number for your application. A=3rd Quarter B=1st Quarter Example 1 ... | |
| pulley will be gold anodized. Note: 3-piece pulley sets include the crank ... 319.00/set Note: N445 N447 fits applications with the early style 4 (short hub), 11- ... 299.00/set Note: N415 N417 fits applications with the early style 4 (short hub), 11- ... | |
| V-8 (RP)................... $3.00/ea. Note 1: Also fits 1967 326 and 400 2bbl. ... Note 2: Diameter: .315 Length: 8.694 N512 ... 400 2BBl, RAII RAIV (RP) . 2.50/ea. Note: Diameter: .315 Length: 9.145 N514 1968 ... 3.50/ea. Note: Diameter: .340 Length: 9.137 Caution: ... 4.50/ea. Note: Diameter: .340 Length: 9.205 Caution: ... , and 301 (GM)............... 5.00/ea. Note: Requires 4 per car. With modification ... , we recommend the 066 in those applications). Crane no longer offers this cam; we ... . For lifters, see N530. Performance Note: N522 can be used in 326, 350, and low ... .). For lifters, see N530. Performance note: Certainly the best for exact ... | |
| the market for the price. Performance note: For more precise timing and durability ... special Low Ball lifters used on RAIV applications to minimize valve float and gain ... maximum RPM. Note: RAIV applications only. N530 1964-77 Hydraulic Lifters, ... . For lifters, see N530. Performance Note: This cam can produce large horsepower ... Designed for street high-performance applications, this cam provides power from 1500- ... . Lift; .465-Intake, .488-Exhaust. Note 1: All Edelbrock cam kits come with ... , assembly lube, and instructions. Note 2: We recommend replacing valve springs ... | |
| Set, All Pont. V-8 (RP) . 16.00/set Note: Freeze plug sets do not include head ... provides excellent oil control. Please Note: We sell only standard size rings. N560 ... using this in any high-performance application. N559D may be used in place of standard ... and use only Felpro gaskets for all applications from stock to highly modified. Their ... construction gives a tight solid seal. Note 1: These kits do not fit 301, RAII, ... , or 455 SD. Please Inquire about these applications. Note 2: These kits do not contain any ... | |
| with absolutely no sign of failure. Note 1: Timing marks are at TDC and 6 BTDC ... for 1959-65 Specifications. Note 2:N585 includes heat-treated hub, ... recommended for high-RPM performance applications. VITON REAR MAIN SEALS ... | |
| lower four-core insulators. For 1968-77 applications 4-core insulators must be used. 1968 3- ... despite claims of being a bolt in application. Note1: For some automatic applications ... radiator. These adapters are included. Note 2: Aluminum radiators are not painted ... if a polished radiator is desired. Note 3: Petcock is not included. Use P134JA ... tranmission linkages, and other various applications. P118AJ Clear Zinc, 11oz Aerosol (AP ... advances, relays, and various other applications. P119VW Radiator Black, 12 oz. Aerosol ( ... | |
| -72 4 core insulators order two P120B. Note 1: The height of your present radiator ... with a 15 1/2 radiator or vice versa. Note 2: Many 1964-67 customers have ... and cannot identify their proper application. The core support can be used for this ... air conditioned or heavy duty cooling application (17 1/2" core). If the opening of the U ... ) it is a standard 15 1/2" radiator application. A 17 1/2" radiator cannot be used in a ... equipped with a 15 1/2" or vice-versa. Note 3: Paint on these radiators is not show ... quality. Note 4: Limited Warranty: U.S. Radiator ... complemented with a fan shroud. Note 1: In many cases we are now stocking ... the radiator for your particular application. Those not stocked must be prepaid and ... | |
| 239.00/ea. P119VZ fits all applications with a 15 1/2 core raditor. This core ... ..................... ... 199.00/ea. Note: P119W and P119X require some ... 11.00/pr. These fit all applications with a 3 9/16" core. P120BC 1971-74 ... | |
| -69. Please refer to photos for correct application. P120Z P120ZB P120ZD P120Z 1966-72 ... Hose, Tri-power (AP)..... Disc. Note: see P130FL for exact hose. P125 1966-67 ... | |
| newer used the post-type. Installation Note: Excessive tightening can result in the ... 8" I.D. hose with .075" wall is used in applications not requiring an overflow bottle. ... and heater hose clamps needed for your application. For AC applications, 2 additional 5/8 ... | |
| for Turbo-Hydramatic 350 transmission applications only. TRANSMISSION COOLING LINES R157NA ... add $12.00 shipping for cooling lines. Note: Beware of low quality reproductions of ... 78.00/ea. Note: Second design pan has only two dimples ... | |
| included for cutting and installation. Note: Check your manual transmission to ... | |
| on original Judges. However, for those applications where authenticity is not required this ... knob found on some early seventies applications. This reproduction differs from original ... 28.00/ea. Note: Not original style, but can be used on ... Clip (GM)............... 1.00/ea. Note: 2 required. COLUMN SHIFT COMPONENTS ... | |
| bushing found on shift linkage levers. Note: Please do not send shifters to Ames ... shifter. It will not fit console applications without modification to the console ... shift ball. Linkage is not included. Note: R164K linkage will work with this ... shifter on 1964-68 applications. S A V E T I M E O R D E R O N L I N E ... | |
| confirm disc size and spline count to application listing above. Beware of low cost, low ... /kit Also fits 1968-69 350 ci. 4 speed. Note: Disc size: 10 3/8 Spline count: 10 ... /kit Also fits 1968-77 350 ci. 3 speed. Note: Disc size: 10 3/8 Spline count: 10 ... 6.00/kit Note:R166GD-R166GR are replacement bolt kits that will not ... ci., 4 Speed (RP) ....... $219.00/kit Note: Disc size: 10 1/2 Spline count: 26. ... ci.,4 Speed (RP) ........ 179.00/kit Note: Disc size: 10 1/2 Spline count: 26. ... RP)..................... .. 179.00/kit Note: Disc size: 11 Spline count: 10. R166G ... ci.,4 Speed (RP) ........ 179.00/kit Note: Disc size: 11 Spline count: 26. R166HD ... is highly recommended for performance applications. This will accept 10 or 11 clutch plates ... 3.00/kit Note: For welded nut converters ... | |
| ) (GM) ...................... 3.00/ea. Note: This is the correct 12 point bolt used ... ) (RE)..................... 16.00/ea. Note: This spring hooks to the exhaust flange ... /8 (GM) ..................... 37.00/ea. Note: R166JK is a plastic replacement for the ... a hole and the location will depend on application. R166L 1967 Clutch Countershaft (Z-Bar ... | |
| 10 Bolt Rear (RP).......... $10.00/ea. Note: R205 replaces 1970-72 wheel seal with a ... 10 Bolt Rear (RP).......... 10.00/ea. Note: R206 replaces 1970-72 wheel seal with a ... 10 Bolt Rear (RP).......... 35.00/ea. Note: R200 replaces 1970 first design rear ... refer to dimensions below for your application. OD 2.747 ID 1.375 R201 1970 Second ... 10 Bolt Rear (RP).......... 30.00/ea. Note: R201 replaces 1970 second design rear ... refer to dimensions below for your application. OD 2.558 ID 1.375 R202 1970-72 Rear ... 10 Bolt Rear (RP).......... 17.00/ea. Note: R204 replaces 1970 first design wheel ... | |
| 169.00/ea. Note 1: R469L and R469R are remanufactured ... using stainless steel linings. Note 2: R469L R469R have a $100.00/ea. ... , RH (RP) ................... 36.00/ea. Note: R473L and R473R each require a $25.00 ... 15.00/kit Note: One kit per caliper. R497 1967-68 ... 9.00/kit Note: One kit per cylinder. REMANUFACTURED ... -piston and 1969-72 2-piston disc brake applications. R447 1967-72 Disc Brake Spindle Bolt, ... | |
| Spring Kit (RP) ............ 13.00/kit Note: One kit does both sides R506 R507 ... RP) ........................ 15.00/ea. Note: R535L and R535R do not include the ... or the center axle flex hose. Important note: The R443C Proportioning valve will also ... call for availability and pricing. Note 1: For wheel fit information for the ... rear disc conversion, please inquire. Note 2: For 12-bolt rear end applications, ... specify the body style of your car. Note 1: Original 14 Rally II wheels ... originally used on drum brake applications will not fit with disc brake ... conversions. Note 2: For applications where clearance is a problem, a 9 power ... at no extra cost. Please inquire. Note 3:The original style brake booster with ... at an additional cost. Please inquire. Note 4: Manual disc brake conversion kits ... | |
| with quick ratio boxes as an option. Note:S129 steering coupler must be used in ... with this steering box for 64-66 applications. S121C 1964-76 Quick Ratio Power ... resulting in 2 1/2 turns lock-to-lock. Note: S129 steering coupler must me used in ... conjunction with S121C on 1964-66 applications. S121D 1977 Quick Ratio Power Steering ... lockvs. the originals at 4 turns. Core Note: S121 through S121D require a $75.00 ... call regarding shipping information. Note 2: Please add $8.00 shipping for ... 189.00/ea. Note :You must use the S128 Steering coupler ... with the S121G Box. Core Note: S121G and S121J require a $60.00 ... | |
| impregnated bushings for all urethane applications. S200 S200 1964-77 Urethane Ball Joint ... 60.00/set Note: You must use your original oval steel ... | |
| weaknesses and are recommended for all applications. Comments: A very close reproduction of ... for changing track conditions. Note 1: Includes hardware for mounting Note ... /1 1/4" Bar (1.250) (AP)..... 18.00/set Note 1: S231RJ through S235 each consist of ... 2 bushings and 2 mounting brackets. Note 2: To determine correct stabilizer bar ... 75.00/set Note 1: Set contains bushings for 2 upper ... and 2 lower control arms. Note 2: Bushings come with outer metal shell ... ) 8 pcs. (AP)................ 84.00/set Note: You must use your original steel oval ... | |
| Support Mount) (APE).... 106.00/set Note:This kit comes complete with core support ... Support Mount) (APE).... 106.00/set Note:This kit comes complete with core support ... 23.00/kit Note: See S382B for details. Use with S382AC ... Set, Cpe. (A-body) (APE) .... 83.00/set Note: This kit does not include core support ... mounts. See S383AF. Note: All front coil spring listings are for ... V/8 applications only. S321 Front Springs (AP ... | |
| 95.00/set Note:This kit comes complete with core support ... 17.00/set Note: See S382B for details. Use with S383AC ... Cpe. (A-body) (APE)......... 20.00/kit Note: See S382B for details. Use with S383AF ... Set, Conv. (A-body) (APE)... 88.00/set Note: This kit does not include core support ... ).................... ..... 100.00/set Note:This kit comes complete with core support ... 17.00/kit Note: See S382B for details. Use with S384AC ... Conv. (A-body) (APE) ....... 20.00/kit Note: See S382B for details. Use with S384AF ... ) (GM).................... 298.00/kit Note: This kit does not include core support ... Kit (A-body) (AP)......... 8.00/kit Note: See S382B for details. Use with S386. ... 110.00/set Note: Comes complete with 4 upper 4 lower ... originally used on many GM body mount applications. S388D S388D 1964-67 Body Mount Bracket ... | |
| strip. 96 pages with 31 illustrations. Note:Very comprehensive yet understandable. W113 ... Pontiacs of the 60s and 70s 31 pages. Note: Both W112 and W113 are highly ... 18.00/ea. W114C covers mild performance applications to all-out performance build-ups on ... | |
| STATE ZIP PHONE ZIP PHONE (Daytime) NOTE: ALWAYS GIVE STREET ADDRESS; UPS CANNOT ... Signature Ames Performance Engineering Note: Orders paid with personal check may be ... | |
