Page 17 of Concrete Fasteners Catalog by Concrete Fastening Systems

15 p 888.498.5747 f 216.391.5352 www.confast.com HANGAR MATE HangerMate is an anchoring/fastening system that allows fast and reliable attachment of 1/4" or 3/8" threaded rod into concrete, steel and wood. All HangerMates are made of a solid, onepiece, cold-formed and machined alloy steel, with either a precision crossdrilled or straight drilled and tapped head. All anchors are yellow chromate zinc plated. TECHNICAL INFO Approvals: Each different HangerMate has specific approvals and specifications, please call 1-888-498- 5747 for all current code approvals. Material Specifications: Each type of HangerMate anchor is made from different steel specifications. These specifications are available upon request. Applications: HangerMate anchors are ideal for overhead vertical or horizontal support applications in wood,, concrete and steel beams or joists. Installation: For Metal or Wood (1) Insert HangerMate recessed drive socket ZE215 into corded screw gun (min. 4.5 amps) or appropriate cordless screw gun. (2) Insert appropriate HangerMate anchor into drive socket. (3) Position the self-drilling point of the anchor at the intended point of installation and with the screw gun operation at approximately 1800 rpm, install the HangerMate anchor. The drive socket's safety set feature will set the anchor flush and then automatically disengage to prevent over driving anchor. (4) The HangerMate anchor is now installed and ready to accept a threaded rod or component. For Masonry/Concrete (1) Insert appropriate HangerMate matched tolerance carbide-tipped drill bit into hammer or rotary hammer drill. For SDS-drive drills use bit ZE380; for keyed chuck-type drills use bit ZE360. (2) With the drill in the hammer mode, drill the full length of the bit. (3) Slide drive sleeve ZE220 over drill bit, locking its enternal hex recess with the hex collar of the drill bit. (4) Insert appropriate HangerMate anchor into the drive sleeve. disengage hammer mode and engage drill-only mode. (5) Place tip of the HangerMate anchor into drilled hole and drive until the safety set feature seats the anchor and disengages. (6) The installed HangerMate anchor is now ready to accept a threaded rod or component. ITEM CONCRETE WOOD 16 GA 16 W/NUT 14 GA 14 W/NUT 12 W/NUT 1/8" 3/16" 1/4" 12 GA Is a registered trademark of Elco Industries. TECHNICAL DATA ZE405 N/A N/A 516 N/A N/A N/A 1433 N/A 2783 4304 3948 ZE455 2181 1694 N/A N/A N/A N/A N/A N/A N/A N/A N/A ZE560 2181 1694 N/A N/A N/A N/A N/A N/A N/A N/A N/A ZE605 N/A N/A 735 N/A 1044 4065 1655 N/A 1889 4545 3255 ZE609 N/A N/A 735 2801 1044 4065 1655 4925 1889 4545 3255 ZE655 N/A N/A 735 2801 1044 4065 N/A N/A N/A N/A N/A ZE710 N/A 2353 N/A N/A N/A N/A N/A N/A N/A N/A N/A ZE800 N/A N/A 735 2801 1044 4065 N/A N/A N/A N/A N/A ZE815 N/A N/A 735 N/A N/A N/A 1655 N/A 2783 4545 3255 ZE819 N/A N/A 735 2801 1044 4065 1655 4925 2783 4545 3255 ZE830 N/A 1889 N/A N/A N/A N/A N/A N/A N/A N/A N/A ZE845 N/A 1889 N/A N/A N/A N/A N/A N/A N/A N/A N/A

[close]