. nMute Control The AF output of the receiver can be muted according to external ... grounding information. nClock/Timer The receiver's power supply is automatically set to on ... Type of reception: USB,LSB,CW,RTTY,AM,FMWFM(with option board installed) ... PHONES RECORD SQ LEVEL RF GAIN LEVEL FM/WFM AM/AMS USB/LSB CW/RTTY CLR MHz ENT/ ... NB 1 NB 2 NOTCH TRACKING NRD-545 DSP RECEIVER WIDE INTER AGC RUN ECSS LOCK CH SCAN ... (0.8 V) 6dB (2 V) USB,LSB,CW,RTTY AM FMWFM Bandwidth:(USB/LSB/CW/RTT Y/AM) 2. ... ,30% (at AM measurement) 12dB SINAD (FM/WFM) *Fitted with option board for ... or less 4kHz or less WIDE INTER NARROW FM Bandwidth 6dB 60dB Left bandwidths in ... 0.01 to 9.99kHz (except for AMS, FM and WFM). Antenna connector (low ...
discharge time constant is fixed in the FM, WFM, AM and AMS modes, AGC is ... affected by the performance of the receiver, because of the high density of the ... range (of small to large signals). The receiver's sensitivity (capacity of receiving ... by the internal noise generated by the receiver itself, while the capacity of handling ... distortion. The NRD-545 DSP Receiver is loaded with a 40-bit extended ... the selectivity characteristics of receivers are eliminated from the new DSP ... receiver. In addition to JRC's recognized ... receiver front end, complete digital signal ... . Thus, the new-generation NRD-545 receiver has come into the world. Digital signal ... the modes including LSB, USB, CW, RTTY, FM, AM and ECSS (Exalted Carrier Selectable ... , and WIDE positions (except for AMS, FM and WFM modes). Pass-Band Shift (PBS) ...