Catalog: DSP Receiver NRD-545
Company/Brand: Japan Radio Co. Ltd.
setting the timing in DSP Receiver NRD-545 by Japan Radio Co. Ltd.
nTuning/Torque Dial The torque of the tuning dial can be freely adjusted. ... nRTTY Fine Tuning The demodulating filter to receive RTTY ... memory channels can be scanned. The scanning time is user-defined. nSweep ... Designated frequencies can be swept. The sweep time is user-defined. nAutomatic ... activated during scan/sweep operation, the operation automatically stops and the ... a certain time duration. nMute Control The AF output of the receiver can be muted ... grounding information. nClock/Timer The receiver's power supply is ... automatically set to on/off by setting the timer. Relay contact output can also be ... turned on/off. nSleep Timer The sleep timer is provided to ... automatically turn the power off during bed time (180 minutes ... less for 5min. to 60min. after tuning the power on, thereafter 2 ppm or less per ...

, emerging from mixed noise, because the spectrum of the periodic signals is ... is adjustable in 256 steps, allowing the most audible conditions to be set. The ... very effective for such noise which the previous noise blanker has not been ... can be set in 256 steps to achieve the most effective condition. The BC is ... multiple beats. Noise Blanker (NB) Like the previous noise blanker, this NB detects ... and removes noise depending on the amplitude level on the time axis. NB1 ( ... width) can be switched over, and the NB detection level is adjustable. Notch ... are attenuated (at 40dB or more) using the steep attenuation characteristic of the ... and stably attenuated when once the NOTCH is preset. It is adjustable ... within 2.5kHz in 10Hz steps. With the notch tracking set to ON, the notch ...