Catalog: Constant Velocity Joints for Industrial Machines | |
| 1 installation procedure 1 checking the installation dimensions check that the ... mounting span on the machine coincides with the length of ... the constant velocity joint see fig 1 fig ... 1 2 filling the grease fill the grease included with the constant ... velocity joint to 1/2 to 1/3 as much as the undercut space capacity of the mounting ... flange hub see fig 2 caution the grease can cause eye inflammation to ... goggles if it has contaminated the eyes rinse with clean water and ... immediately seek medical attention the grease can cause skin inflammation when ... with water and soap ¡avoid hitting the cvj with a foreign object or exerting ... an impact force onto the cvj ¡limit the angle to the operating angle range at ... state in order to avoid damage on the boot ¡be careful not to damage or ... | |
| usage and handling 2 precautions for operation 1 operating environment the seal member ... rubber though varying depending on the operating conditions the recommended ... engineering also when intending to use the cvj in an environment where oil organic ... leakage when grease has leaked from the mounting section of the cvj or the ... tightening section of the boot band replenish grease and exercise ... measure such as retightening of the bolts and replacement of the boot band ... packing and o-ring when replacing the boot band be sure to use a fresh one 3 ... grease when replenishing grease to the cvj avoid overfilling to prevent the ... being deformed to replace grease remove the old grease and fill fresh grease after ... degreasing cleaning of the joint be sure to apply grease to the ... | |
| ntn constant velocity joints observe the following instructions 1 store in a ... clean dry location 2 to prevent the boots from being deformed avoid storing ... the assemblies in an unstable state fig 1 ... store them in a stable horizontal position fig 2 ... 3 protect the boots etc with a cover 4 do not stack ... containing constant velocity assemblies the additional weight may deform the boxes ... and damage to the contents may occur 5 when using a ... a prolonged period elaborately inspect the state of boot and grease photo 33 6 ... band fastening jig photo 34 illustrates the boot band fastening jig photo 34 part ... fastening boot bands 1 securely fasten the boot band to avoid leakage of grease 2 ... carefully fasten the boot band so as not to damage or deform ... it 3 carefully fold the boot band fastening portion so that the ... | |
